• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 33 subscribers
  • Views 262 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

TS3DV642 can't pass HDMI2.0 Differential Impedance measurement Spec, how to solve it?

TS3DV642: Can TS3DV642 pass HDMI2.0 TDR test?

user6146541
Prodigy 80 points
Part Number: TS3DV642


We are considering to use the TS3DV642 on HDMI 2.0 port (Sink).

According to past threads, some users have failed the HDMI 2.0 TDR (Hot TDR) test with this device.

e.g)

e2e.ti.com/.../687146

e2e.ti.com/.../1983167

I can't read from these threads whether the issue could be resolved because the thread's communication has shifted to direct mail.

So can TS3DV642 pass the HDMI 2.0 TDR test?

  • 0
    TI__Guru**** 180881 points

    Hi,

    HDMI2.0 TDR test is a system test, so a properly designed board needs to retain a 100-Ω differential impedance through the switch. When designing in TS3DV642, you need to take its Ron into account when specifying the PCB differential trace impedance.

    Alternatively, you can place a redriver/retimer at the output of the TS3DV642 as a way to block the TS3DV642 Ron effect.

    Thanks

    David