TPD1S414: block diagram question

Andy_Lin

Part Number: TPD1S414

Hi Team ,

quick check , in the d/s block diagram shown, the DC caps of VBUS_CON and VBUS_SYS are connected to GND right?

the block diagram looks forget to add a node , which causing customer confuse , kindly help to check on this , thanks!

0 Andy_Lin over 6 years ago

add one more question, customer also asking that is Vbus_con cap can set as 2.2uF or not?

I think there's no problem on this , although the typ value is 1uF in d/s , but the maximum value is up to 50uF.

0 Michael Tan over 6 years ago

Hi Andy,

Yes, the two ground is connect together , it should have a node there.The picture show not clear for the connection.

0 Andy_Lin over 6 years ago in reply to Michael Tan

Dear Micheal ,

thanks for prompt feedback , would you help to quick check the 2nd question(Vbus_con cap) too?

0 Michael Tan over 6 years ago in reply to Andy_Lin

Hi Andy,

Yes, the 2.2uF cap value should be no problem.

0 Andy_Lin over 6 years ago in reply to Michael Tan

Michael,

thanks you for the check!

Andy

Interface forum