Looks for LVDS driver part similar to SN65LVDS4RSET

srinivasarao rao

Prodigy 70 points

Hi ,

I want to convet the LVCMOS1V8 to LVDS. i dont want to use the LV to covert the LVCMOS1.8 to LVCMOS2.5V.

I found a part for LVDS receiver SN65LVDS4RSE have a VDD and VCC pin.

is there a part same ?

Thanks

srinivasarao

over 5 years ago

0 Ikechukwu Anyiam over 5 years ago

TI__Mastermind 35130 points

Hi Srinivasa,

We don't currently have a 1.8V LVDS driver. You will need to use a level shifter and interface it with one of our 3.3V LVDS drivers. Please see this application note for details: http://www.ti.com/lit/an/snla307/snla307.pdf

Regards,

I.K.

Interface

Interface forum

Looks for LVDS driver part similar to SN65LVDS4RSET