• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 33 subscribers
  • Views 313 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LMH1228: Manual setting of EQ strength in simulation of IBIS AMI model

Takahiro Saito
Expert 5455 points
Part Number: LMH1228

Hi team,

My cusotmer will run a simulation with IBIS AMI model. In the IBIS AMI model, is the adaptive EQ mode available? If not, is EQ strength need to be set by manual?

Regards,

Saito

  • 0
    TI__Guru* 93670 points

    Hi Saito-San,

    Through IBIS-AMI model, the user need to set VOD, EQ strength settings. Please refer your customer to IBIS-AMI User Guide. This model can operate in either adaptive or manual mode. When operating in manual mode, the user can set the EQ strength. This user guide specifies how to setup the model in either mode.

    Regards,, Nasser