• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 33 subscribers
  • Views 326 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DP83867IR: use 100 Mbps

Ilia Gordeev
Prodigy 10 points

Part Number: DP83867IR

Good day,

How to physically realize the use of 100 Mbit with the programmed capability of 10/100/1000 Mbit? Are there any restrictions on the choice of differential pairs or can you choose any? Or must I use all 8 output pins?

Regards,

Ilia

  • 0
    TI__Genius 16030 points

    Hi Ilia,

    By default 100mbps will be on channel A and B, but you can also assign channel C and D for 100mbps by enabling mirror mode. You may refer to mirror mode section in the datasheet for details.

    You may force the speed to 10/100/1000 by the strap configurations. Kindly refer to programming section of the datasheet.

    --

    Regards,

    Vikram