This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Expert,
Here is a question from my customer. As below picture shows, is the side surface of pins able to wet the solder?
They just wonder if they SMT the unit first, and then solder from the side surface. Is this OK for this kind of producing method?
Wilson
Hi Wilson,
Please check the "SOLDER PASTE EXAMPLE " in the datasheet.
If the solder paste area is met, only doing SMT is ok. The side(tip) can wet the solder.
Best Regards,
Charley Cai