• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 34 subscribers
  • Views 305 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DP83867E: SGMII

Masaru Tomabechi
Prodigy 60 points

Part Number: DP83867E

I want 4WIREMODE SGMII to work without any MDIO configuration.
Does it work only with LED _ 0 strap setting?
Is there any restriction by not controlling MDIO?
(For example, we cannot enable/disable the autonegotiation function. etc)

  • 0
    TI__Expert 7040 points

    Hello,

    You can use LED_0 to strap the device into SGMII mode, without needing additional MDIO configuration. However MDIO access is highly recommended as a debugging tool and to have the ability to tune the features or performance of the PHY as the system is evaluated. 

    Regards,
    Justin