• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 33 subscribers
  • Views 154 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS65987D: Compliance test for TPS65987D/8

Takuya Terada
Expert 5115 points
Part Number: TPS65987D

Hi Team,

My customer would like to know which configuration that user can change is related to USBPD compliance test like SPT1 to SPT8.

I think user cannot change some configuration (ex. tSrcRecover ) by using GUI.

Are there any document that shows which configuration is related to which compliance test (like SPT1,SPT2,,,SPT8)?

best regards,

Takuya

  

  • 0
    TI__Mastermind 30000 points

    Hello,

    Would you be able to give more information about the SPTx tests? I am not familiar with this term. Which compliance tester are you referring to? 

    How compliance testing is typically done is you configure the tester depending on the characteristics of the PD controller and the system it is designed on. The compliance tester is used to check the compliance of a end equipment. You want to configure the tester around the end equipment not configure your end equipment around the tester.