Some questions about TUSB9260 and tms320c6a8168.

shao lei

Other Parts Discussed in Thread: TUSB9260, TUSB1310A

I have some questions about TUSB9260.

(1) : Can TUSB9260's STAT interface attached TMS320C6A8168's STAT interface? At this time, TMS320C6A8168 get some vide data by it's EMIF, I hope these vide data can be sent to PC by usb3.0.

(2): Am I only change fireware from TUSB9260's SPI flash, I can realize (1).

(3): How I can get tool about TUSB9260, fireware espceially.

over 14 years ago

0 DHarmon over 14 years ago

TI__Genius 16430 points

SATA is a directional bus - by that I mean that there is a SATA host (master) and SATA slave (usually the drive).

The SATA interface on both the TUSB9260 and the DSP are SATA host ports and therefore there is no way that they can interface with each other.

0 shao lei over 14 years ago in reply to DHarmon

Prodigy 70 points

Thanks your reply

You can tell me some good advice about how TMS320C6A8168 become USB3.0 DEVICE(peripheral)?

TMS320C6A8168 support interface who can achieve usb3.0's data rate: PCIe, STAT, DDR3.

0 DHarmon over 14 years ago in reply to shao lei

TI__Genius 16430 points

Shao Lei,

To make the DSP capable of supporting USB 3.0 will require an external FPGA with athe USB 3.0 digital core in it along with our TUSB1310A transceiver - please see this blog post which discusses this in more general terms.

Interface

Interface forum

Some questions about TUSB9260 and tms320c6a8168.