DS90UB941AS-Q1: if DS90UB948 support hot plug

Kailyn Chen

Part Number: DS90UB941AS-Q1

Hello，

Our customer used DS90UB941AS+DS90UB948 for his application, but he need hot plug, so I'd like to confirm if it is feasible in this high speed application, or do you have any other suggestions about high speed hot plug application?

Best regards

Kailyn

over 4 years ago

0 Charley Cai over 4 years ago

TI__Genius 12866 points

Hi Kailyn,

Hot plugging 941 and 948 FPD link is not recommended.

If hot pulg is required, 948 AEQ should be reset after each hot plug to ensure AEQ is locking to the correct signal coming from 941AS.

Please also note that typically the connectors used for FPDlink has max insertion number limits. Please verify that the connector can handle the number of hot plug required.

Best Regards,

Charley Cai

0 Kailyn Chen over 4 years ago in reply to Charley Cai

TI__Genius 9560 points

hi Charley‘

Thank you for your reply.

Best regards

Kailyn

Interface

Interface forum

DS90UB941AS-Q1: if DS90UB948 support hot plug