• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 450 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TUSB322I: TUSB322I

CS kk
Intellectual 400 points
Part Number: TUSB322I

dear

 please help to check if  USB322IRWBR and TUSB542RWQR  logic switch  channnel  select  is reasonable ,thanks in advance

  • 0
    TI__Guru 64326 points

    Hi,

    In this case it is okay to swap the CC1/CC2 of TUSB322I to the connector this will correct the logic of the DIR pin to be consistent with your schematic. 

    (ex. TUSB322I CC1 --> Connector CC2 &  TUSB322I CC2 --> Connector CC1)