DS160PR410: question about IBIS-AMI model

K.Yaita

Part Number: DS160PR410

Hi Team,

My customer saw the following capture with DS160PR410_Example1 by ADS(Advances Design System: Keysight).

Could you tell me what does "Corner=0" indicate?

Best Regards,
Yaita

over 5 years ago

0 K.Yaita over 5 years ago

Guru 29720 points

Hi Team,

May I have your reply?

Best Regards,
Yaita

0 Nasser Mohammadi over 5 years ago in reply to K.Yaita

TI__Guru* 93570 points

Hi Yaita-San,

Please refer to the IBIS-AMI user Guide table 2. This parameter takes a value of 0, 1, or 2. This refers to the process corner and these are for typical, minimum, and maximum process corners respectively.

Regards,, Nasser

0 K.Yaita over 5 years ago in reply to Nasser Mohammadi

Guru 29720 points

Hi Nasser-san,

Thank you for your kind support.

Sorry to ask such a basic question..
Can I see "IBIS-AMI user guide" in web site?
If the answer is yes, could you please share the link?

Best Regards,
Yaita

0 Nasser Mohammadi over 5 years ago in reply to K.Yaita

TI__Guru* 93570 points

Hi Yaita-San,

Please follow the link below and request access to this file:

https://www.ti.com/drr/opn/DS160PR410-DESIGN

Regards,, Nasser

Interface

Interface forum

DS160PR410: question about IBIS-AMI model