TI USB 3.0 xHCI Host Controller Win 10 Driver

Jonathan Etheridge

Prodigy 20 points

Other Parts Discussed in Thread: TUSB7320, TUSB7340

Please forgive me if tis is the wrong forum - I'm new here!

Windows 10 recently updated a somewhat aged HP computer of mine

At which point my USB 3.0 stopped working .

Looking at the device manager it is a TI USB 3.0 xHCI Host Controller

Windows is giving me a Code 10 "The device cannot start" error

windows claims to have the latest driver installed and I have tried every remedy under the sun short of 'reprogramming with a large brick"!

Can anyone shed any light on this....maybe point me a s source for alternative drivers

I would be tearing my hair out if I had enough left

Many thanks for any assistance you can offer

Jonathan

over 4 years ago

0 Malik Barton57 over 4 years ago

TI__Guru 64326 points

Hi Jonathan,

TI has two Host controller devices TUSB7320 and TUSB7340. Both devices use the default xHCI drivers provided by the WIndows 10 OS. The link below you will find the TUSB73x0 xHCI Filter Driver for Win8/8.1/10 (Rev. A) which may need to be reinstalled on your Windows 10 system. Please confirm if this driver is installed already and if not please install it. Also you should make sure the Windows 7 (and older) driver is not installed on your system.

0 Jonathan Etheridge over 4 years ago in reply to Malik Barton57

Prodigy 20 points

Hi Malik

Thank you very much for you reply and for solving my problem

Installed the driver and all seems to be working once again

Many thanks for the great support

Jonathan

Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

Interface

Interface forum

TI USB 3.0 xHCI Host Controller Win 10 Driver