DS90UB960-Q1: kernel driers for DS90UB960-Q1, DS90UB962-Q1 and DS90UB964-Q1

Ajith Kumaresh1

Prodigy 30 points

Part Number: DS90UB960-Q1
Other Parts Discussed in Thread: DS90UB964-Q1, DS90UB962-Q1

Hi team,

Is there any existing linux kernel drivers for DS90UB960-Q1, DS90UB962-Q1 and DS90UB964-Q1?

also, I would like to know differences between these three deserializers (DS90UB960-Q1, DS90UB962-Q1 and DS90UB964-Q1)

Thanks,

Ajith

over 4 years ago

0 Hamzeh Jaradat over 4 years ago

TI__Guru** 108400 points

Hello Ajith,

Unfortunately, we do not have a Linux driver for any of our SER/DES devices. You can reference the datasheet for programming guidance and also use our Analog Launchpad GUI to try out different programming. Please let us know if you have any specific programming questions.

Actually for these devices, if you have correct hardware sittings, then you will not need any or very limited settings.

0 Ajith Kumaresh1 over 4 years ago in reply to Hamzeh Jaradat

Prodigy 30 points

Hamzeh Jaradat

Thank you for the reply.

I would like to know differences between these three deserializers (DS90UB960-Q1, DS90UB962-Q1 and DS90UB964-Q1)

0 Hamzeh Jaradat over 4 years ago in reply to Ajith Kumaresh1

TI__Guru** 108400 points

Hello Ajith,

960: 4x RX inputs, each runs at max. 3,28Gbps (Video). 2x CSI-2 outputs.

962: 4x RX inputs, each runs at max. 2,528Gbps (Video). 1x CSI-2 outputs.

962: 4x RX inputs, each runs at max. 1,7Gbps (Video in DVP mode). 2x CSI-2 outputs.

Interface

Interface forum

DS90UB960-Q1: kernel driers for DS90UB960-Q1, DS90UB962-Q1 and DS90UB964-Q1