SN65MLVD206B: Eye mask for M-LVDS

Yunjing Wang1

Part Number: SN65MLVD206B

Hi team

My customer is using SN65MLVS206B to design M-LVDS backplane bus, and need to test the max signal rate.

Is there an Eye Mask for M-LVDS in BU side for transceiver waveform test？what is the method in BU side to test the maximum data rate？

Thanks and best regards

Yunjing

over 4 years ago

0 Ikechukwu Anyiam over 4 years ago

TI__Mastermind 35130 points

Hi Yunjing,

M-LVDS doesn't have eye mask requirements. In general for most devices you'll want to see a minimum of 100mV vertical eye opening and around 0.75 UI horizontal eye opening though.

You can reference this application note for data rate measurements: https://www.ti.com/lit/an/slaa845/slaa845.pdf

Regards,

I.K.

Interface

Interface forum

SN65MLVD206B: Eye mask for M-LVDS