• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 33 subscribers
  • Views 225 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TCAN4550: Any restriction compared to using an internal CAN-FD peripheral inside MCU

Oba
Genius 17605 points
Part Number: TCAN4550


Hello,

 
My customer is very interested in TCAN4550 for an industrial application and have a question.
Does TCAN4550 have any restriction or something they have to take care compared to using an internal CAN-FD peripheral inside MCU?

Regards,
Oba

  • 0
    TI__Guru 74322 points

    Oba,

    The TCAN4550 and TCAN4550-Q1 device contains a controller and transceiver in one package. The controller is defined by the Bosch MCAN CAN FD definition, which many CAN-FD peripherals inside MCUs follow as well. All of the CAN FD configuration is done through SPI on the TCAN4550 from the MCU. For more details, look into the TCAN4550-Q1 Software User's Guide for details on how to configure the device and use it to facilitate CAN communication.

    Regards,