TLK106: how to get the MAC-addresses?

Slava Prokopii

Intellectual 2075 points

Part Number: TLK106

Hello.

We are going to produce a series of devices with TLK106 onboard.
The user of end equipment requests us to provide the MAC-addresses in advance. He's going to setup the gird infrastructure basing on this information.

Is there a way to get the information about MAC-address assigned to certain TLK106 device, before end equipment is manufactured?

Thank you.

over 3 years ago

0 Justin Lazaruk over 3 years ago

TI__Expert 7040 points

Hi Slava,

The MAC address belongs to upper layer and is not related to DP83867 PHY. The PHY does not generate any MAC address.

Please also note that the TLK106 is not recommended for new designs. The DP83822 or DP83826 may be better alternatives for continued TI support.

Regards,
Justin

0 Slava Prokopii over 3 years ago in reply to Justin Lazaruk

TI__Intellectual 2075 points

Hello, Justin.

Do I get right, that MAC-address (in the case of using TLK106) is determined by MCU/MPU, by which TLK106 is controlled?

0 Justin Lazaruk over 3 years ago in reply to Slava Prokopii

TI__Expert 7040 points

Hi Slava,

That is correct.

Regards,
Justin

Interface

Interface forum

TLK106: how to get the MAC-addresses?