This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DP83TG720EVM-MC: DP83TG720EVM-MC:

Part Number: DP83TG720EVM-MC
Other Parts Discussed in Thread: USB-2-MDIO,

I have USB-2-MDIO installed on a windows10 computer. How can I read out debug information from the DP83TG720EVM-MC module

I have seen this conversation "DP83TG720EVM-MC: Network-bridge with DP83TG720EVM-MC Media Converter Evaluation Module"

The setup is working fine on my desk

I would like to know how to read out debug information from the DP83TG720EVM-MC module?

  • Hi Ulrik,

    On the other thread, the customer used a serial terminal tool to get the debug information in that format. However, you can get all the information presented by reading the specific registers one at a time using the USB-2-MDIO tool. You can refer to the DP83TG720 datasheet on which registers provide which information.

    Regards,

    Adrian Kam