• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 34 subscribers
  • Views 879 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TXB0108PWR

Ambily Mary Martin
Prodigy 10 points

Other Parts Discussed in Thread: SN74LVC2T45, SN74AHC125

I am using the IC  TXB0108PWR for translating a square pulse of 5VP-P ,working with 1MHZ to 5MHZ.But I am only getting output correctly (5V to 3.3V conversion without noise ) till 800KhZ.I am attaching the schematics part ,Kindly help on the  same.

  • 0
    Guru 323990 points

    This problem is typically caused by the capacitive load being too high. The TXB does not work with loads higher than 70 pF; see sections 8.3.3 and 8.3.5 of the datasheet.

    For unidirectional signals, direction-controlled level shifters like the SN74LVC2T45 would be more robust and flexible. For shifting to a lower voltage, you could also use a buffer with overvoltage-tolerant inputs like the SN74AHC125.