• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 33 subscribers
  • Views 363 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS125MB203：OTU2 signal

Miranda Gu
Genius 16752 points
Part Number: DS125MB203


Hi team,

1. Can DS125MB203 support OTU2 signal transmission?

2. My customer use DS125MB203 to transmit OTU2, but the error code was high. How to tuning the DS125MB203 parameter? Could you give some guidance?

P.S. Customer chose 10-KR MODE.

Look forward your kind support!

  • 0
    TI__Guru* 93570 points

    Hi Miranda,

    1). It is my understanding that OTU2 uses NRZ data. Given this, please recommend using MODE 0 or 10GbE mode.

    2). Please note table 2 of the data sheet. To tune the device, please start with level 1 settings and at each level and for each level in this table check for optimum bit error.

    Regards,, Nasser