• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 33 subscribers
  • Views 285 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS90UB960-Q1: DS90UB960-Q1 frame sync

Terry Liang
Intellectual 1990 points
Part Number: DS90UB960-Q1

Hi team,

1. For UB960, is that necessary to configurate frame sync in round robin forward mode? or depends on the sensor requirement? why?

2. whether the frequency of frame sync should match with the frame rate of the video stream? 

3. Synchronized forwarding mode, how to judge if there is a Synchronized error? any registers?

thanks!

  • 0
    TI__Guru** 108100 points

    Hello Terry,

    1) when using the Round Robin forwarding mode, you do not need to use frame sync.

    2) Yes, this should match.

    3) Synch error status can be found in Reg 0x22[3:2] and 0x35[1].

    Also you can enable Sychronization interrupt in register 0x36.