TS3DV642: TS3DV642

Hi,

The pictures are missing from your thread, would you please re-attach the pictures?

Thanks

David

Hi,

with reference to the following hdmi specification for the cec line:

and to the following electrical feature for the ts3dv642 component:

Using the component as suggested by the datasheet for HDMI applications, how can you ensure that the Ts3dv642 complies with the HDMI 1.4b specification?

Hi,

with reference to the following hdmi specification for the cec line:

and to the following electrical feature for the ts3dv642 component:

Using the component as suggested by the datasheet for HDMI applications, how can you ensure that the Ts3dv642 complies with the HDMI 1.4b specification?

Hi, 

Please give me couple days to have a discussion with my design team so we can see what is the best way to achieve this.

Thanks

David

Hi,

Sorry for the delay on this thread. I verified in the lab that in order to meet the CEC < 1.8uA requirement, you have to drive the CEC pin low. The leakage current then is around 1uA. The 10uA leakage current spec in the datasheet is when the TS3DV642 pins are being driven high.

Thanks

David