DS90UB960-Q1EVM: EVM J1/J3 pin assignment

Masatoshi Oguri

Part Number: DS90UB960-Q1EVM

Hello,

Please confirm the pin assignment of J1 and J3 in the below picture is correct. My customer is considering designing a CSI-2 bridge board. Thank you.

Regards,

Oguri (TIJ automotive FAE)

over 5 years ago

0 Steven(Shenzhen) Shi over 5 years ago

TI__Mastermind 30515 points

Oguri,

for this pinout, can you check our evm user guide? it has sch. design in page20 on J3/J1 connector pinout.

https://www.ti.com/lit/ug/snlu226a/snlu226a.pdf?ts=1608027421811&ref_url=https%253A%252F%252Fwww.ti.com%252Ftool%252FDS90UB960-Q1EVM

regards,

Steven

0 Masatoshi Oguri over 5 years ago in reply to Steven(Shenzhen) Shi

TI__Expert 4780 points

Hi Steven

From the figures in the user guide, it is not clear which pin is the pin #1. Please confirm if the pin assignment shown in the above picture is correct or not.

Thank you.

Regards,

Oguri

0 Steven(Shenzhen) Shi over 5 years ago in reply to Masatoshi Oguri

TI__Mastermind 30515 points

Yes, the symbol in the picture is right.

you can check evm layout in page45, this is clear for you.

regards,

Steven

Interface

Interface forum

DS90UB960-Q1EVM: EVM J1/J3 pin assignment