TUSB8042A: TUSB8042A USB Signal Compliance test

user5270072

Intellectual 275 points

Part Number: TUSB8042A
Other Parts Discussed in Thread: TUSB9261

Hi There,

I'm trying to do a compliance test under Linux Yocto OS(Kernel 5.4.45), how can I send the pattern under Linux os?

over 3 years ago

0 Brian Zhou over 3 years ago

TI__Guru** 120065 points

there is the link talking about how to command the hub to enter downstream port TX compliance.

0 user5270072 over 3 years ago in reply to Brian Zhou

Intellectual 275 points

Hi Brian,

Thanks for ur reply, I have another question about USB compliance test, I have two USB 3.1 HUB(TUSB8042A), and the secondary hub upstream port connect to the first HUB downstream port 3, all the USB HUB#1 downstream port connect to IC (like TUSB9261 . TUSB8042A . etc), and all the secondary HUB connect to the USB Type-A connector, so I have to set both TUSB8042A HUB to compliance mode when I do the compliance mode test right?(USB 3.1 gen 1 & USB 2.0/1.1/1.0 test)

0 Brian Zhou over 3 years ago in reply to user5270072

TI__Guru** 120065 points

right

Interface

Interface forum

TUSB8042A: TUSB8042A USB Signal Compliance test