THVD1550: P2P to replace the MAX14787EGSA+ & MAX14789EGSA

Frank Xiao

Genius 12055 points

Part Number: THVD1550
Other Parts Discussed in Thread: THVD1451,

Hi team,

My customer is using the MAX14787EGSA+ & MAX14789EGSA now. We want to do P2P replacement of the devices. Not sure whether we have p2p solutions. If we don't, could you please share the most suitable devices and share the comparison table? You can connect us offline with email. Thanks.

over 4 years ago

0 Clemens Ladisch over 4 years ago

Guru 317370 points

These transceivers use a standard pinout.

The THVD1550 has similar ESD protection, but is half duplex and works only at 5 V. For full duplex with both 5 V and 3.3 V support, use the THVD1451. There is no similar device with slew-rate limited outputs for slower speeds; the SN64HVD1471 has only 3.3 V support.

0 Hao L over 4 years ago in reply to Clemens Ladisch

TI__Mastermind 25705 points

Frank,

What spec does the customer care about MAX14787EGSA/MAX14789EGSA? Like Clemens mentioned, THVD14xx might to be the closet one working with both 3.3V and 5V.

Regards,

Hao

Interface

Interface forum

THVD1550: P2P to replace the MAX14787EGSA+ & MAX14789EGSA