• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 33 subscribers
  • Views 132 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS90UB953A-Q1EVM: TX P/N enable

Revanth A1
Intellectual 300 points
Part Number: DS90UB953A-Q1EVM

Hello,
We have DS90UB953A-Q1EVM for receiving MIPI signal and convert to FPD-link III , here in Eval board the connector J16 is TXP and the line TXN is terminated to 50ohms, but in our application we need both TX P/N (differential pair signal). Is there any way to take it out as differential pair signal? 

  • 0
    TI__Expert 5480 points

    Hi Revanth, 

    The EVM is optimized for coax application and not STP. If you are looking for STP, you will need to create the design. However, if you are looking to check the functionality, all that can still be done using coax to get familiarity with our products. 

    Thanks

    Sally