DS160PR410: use external EEPROM to configure the redriver

Frank Xiao

Genius 12055 points

Part Number: DS160PR410

Hi team,

My customer is using the DS160PR410 now. We want to use external EEPROM to configure the redriver. We want to check whether we need to whether it has some limitation with redriver and EEPROM I2C(For example series address). Thanks.

over 4 years ago

0 Nasser Mohammadi over 4 years ago

TI__Guru* 93570 points

Hi Frank,

Yes you can use DS160PR410 GUI to create EEPROM nhex file for SMBus addresses you have noted above. To do this, you can run the GUI in demo mode and go to the EEPROM tab. Please refer to the document below for more details:

https://www.ti.com/lit/an/snla320/snla320.pdf?ts=1611025557411&ref_url=https%253A%252F%252Fwww.ti.com%252Fproduct%252FDS160PR410%253FkeyMatch%253DDS160PR410%2526tisearch%253DSearch-EN-everything%2526usecase%253DGPN

Regards,, Nasser

Interface

Interface forum

DS160PR410: use external EEPROM to configure the redriver