TPS25750: TPS25750 Application Tool: USB 2.0 OTG ID Pin

JC Billard

Part Number: TPS25750

Hello,

Does the TPS25750 Application tool generated firmware, outputs on any of the GPIO the current role that has been negociated?

The purpose would be to mirror this role to an USB 2.0 connection through ID Pin, when we enable Host & Slave data role in the configuration tool.

And as a related matter what are the PWR_SRC pin possible states in the TPS25750 EVM?

Best regards

over 4 years ago

0 Chuck Branch over 4 years ago

TI__Mastermind 32871 points

JC,

The next gui revision which should be out at the end of January provides for GPIO configuration with all of the supported events.

0 JC Billard over 4 years ago in reply to Chuck Branch

Prodigy 85 points

Hi Chuck,

Thanks for your quick reply.

I have to finish a design by next week, could it be possible you provide further information (even if it is not official) so I could integrate these?

Best regards

0 Chuck Branch over 4 years ago in reply to JC Billard

TI__Mastermind 32871 points

If you send me a a friend request, then you can share the schematic confidentially through private message. I am able to generate the firmware for you and review the schematic to ensure correctness before your design ships.

0 JC Billard over 4 years ago in reply to Chuck Branch

Prodigy 85 points

Great, let's be friends!

Thanks for the quick reply

Interface

Interface forum

TPS25750: TPS25750 Application Tool: USB 2.0 OTG ID Pin