DS90UB947-Q1: display black when hot plugin 947/948

Betty Guo

Hi team,

customer use 947/948. they found when hot-plug between 947 and 948, the display will black probabilistic. they hope we can review their code, can you help to review their software code to see if there any problems?

thanks.

over 5 years ago

0 Michael.Walker over 5 years ago

TI__Mastermind 19720 points

Hi Batty,
The 948 and 947 are not meant to be hot plugged into each other. Please look at the "Figure 9-1. Power Sequence" on the 948's datasheet. The RIN FPD-Link signal must be present at the 948 at powerup.

Regards,

Michael W.

0 Betty Guo over 5 years ago in reply to Michael.Walker

TI__Expert 7300 points

Hi Michael,

understood. can you help to review customer code, since it is sensitive, I have sent it to you via email.

a new problem is they found the display light up very slow after complete 947/948 configuration.

thank you

0 Michael.Walker over 5 years ago in reply to Betty Guo

TI__Mastermind 19720 points

Hi,

I have replied to your email.

Regards,

Michael W.

Interface

Interface forum

DS90UB947-Q1: display black when hot plugin 947/948