This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS25750: Can TPS25750 help to communicate with the PD adapter only source 15V to BUS

Part Number: TPS25750

Hi Expert,

The engineer is asking whether TPS25750 can help to communicate with the PD adapter only source 15V to BUS. 

If yes.Pls guide us the procedure of TPS25750.

Thanks

Best regards,

Eric Lai

  

Field Application Engineer

Texas Instruments Taiwan Limited

O: +886-2-2175-2582

M: +886-909-262-582

E-Mail:Eric.Lai@ti.com        

  • Eric,

    It is possible to configure the TPS25750 to only support a single power output at any voltage, but this is not typically done.  Most systems are configured to support at least one 5V PDO (5V 1.5A or 5V 3A) are most common.

    The application gui that will be released at the end of the month will allow for custom definition of the exact PDO contracts that are presented.  With this gui, you can create a configuration that only supports 15V.

    Regards,

    Chuck