SN65LVDS93A-Q1: pin connection

Takao Yamamoto5

Part Number: SN65LVDS93A-Q1
Other Parts Discussed in Thread: SN65LVDS93A

Hi team,

I want to use this device as a bridge from 16-bit parallel to OpenLDI(data:4-lane, clock:1-lane), but this device has 28 bit input (D0 ~ D27 pin).

How I connect these pins?

Or...Could you teach me other device if this device cannot control 16bit parallel signal?

Best regards,

over 4 years ago

0 Aaron Heng over 4 years ago

TI__Mastermind 37390 points

Hi Takao-san,

Let me review this, and I will provide you the solution by 1/26.

Aaron

0 Takao Yamamoto5 over 4 years ago in reply to Aaron Heng

Expert 1690 points

Hi Aaron-san,

Do you have any update?

Takao

0 Aaron Heng over 4 years ago in reply to Takao Yamamoto5

TI__Mastermind 37390 points

Hi Takao-san,

What is 16-bit mean? I only heard the format should be 18/24/20 bit, and there is no RGB of 16-bit. So, if you want to bridge them, it doesn't matter as long as the Rx input matches the SN65LVDS93A. For example SN65LVDS93A has 24-bit input from D0-D23, if D0 is Red0 then whatever the Rx input mapped is has to be D0 = R0.

Aaron

Interface

Interface forum

SN65LVDS93A-Q1: pin connection