LMH1228: Output Slew Rate

K.Yaita

Part Number: LMH1228

Hi Team,

I understand the output edge rate of SDI_OUT1 and SDI_OUT2 is automatically programmed for LMH1228, so I believe we can't manually change edge rate.
Is my understanding correct?
My customer wants to know if it is possible or not so I would like to confirm just in case.

Best Regards,
Yaita

over 4 years ago

0 Nasser Mohammadi over 4 years ago

TI__Guru* 93570 points

Hi Yaita-San,

Your understanding is correct.

Device automatically detects incoming data rates(12G/6G, 3G/HD, and SD) and based on this detection it automatically sets the slew rate. In a case there is a data rate outside of this data rates - for example 10.3125Gbps - device selects high speed slew rate(12G/6G).

Regards,, Nasser

0 K.Yaita over 4 years ago in reply to Nasser Mohammadi

Guru 29720 points

Hi Nasser-san,

Thank you always for your support.
I understand.

Best Regards,
Yaita

Interface

Interface forum

LMH1228: Output Slew Rate