DP83867IR: Connection with I.MX8QM

user4449052

Part Number: DP83867IR

I want to connect the MIMX8QM6AVUFFAB(NXP) to the DP83867IRP.
Do you have any experience with this?

AR8031 (Qualcomm) is used in EVK, but it is not supported and I want to replace it.
I was researching and found a suggestion to replace with DP83867IRP, so I asked the question.
www.ti.com/.../snla333.pdf

over 5 years ago

0 Aniruddha Khadye over 5 years ago

TI__Mastermind 18425 points

Hello,

At the moment, we do not have any reference design or example schematics with I.MX8QM. However, you can use the above app note to make the necessary design changes to replace AR8031 with DP83867. We also have linux drivers for DP83867 which can be used as-is or as reference for developing your own software.

-Regards

Aniruddha

0 user4449052 over 5 years ago

Prodigy 160 points

Hello,

OK!

Thank you!

Regards,

Interface

Interface forum

DP83867IR: Connection with I.MX8QM