DS25CP102: IBIS Model

Michael Casey1

Prodigy 20 points

Part Number: DS25CP102
Other Parts Discussed in Thread: TINA-TI

How do I import the IBIS Model into Pspice for TI or Tina, grateful for any help

over 5 years ago

0 Ikechukwu Anyiam over 5 years ago

TI__Mastermind 35130 points

Hi Michael,

You cannot import IBIS models into Pspice or Tina. You need simulation software like ADS or Hyperlynx.

Regards,

I.K.

0 Michael Casey1 over 5 years ago in reply to Ikechukwu Anyiam

Prodigy 20 points

Thanks I.K,

it seems strange that on the TI website under Design Tools & Simulation for the DS25CP102 you get the following:

* IBIS Model

* Pspice for TI

* Tina-Ti

But you can't use them? Strange

Regards

Michael

0 Ikechukwu Anyiam over 5 years ago in reply to Michael Casey1

TI__Mastermind 35130 points

Hi Michael,

The website lists PSpice and Tina under Design Tools & Simulation for all TI parts regardless of whether or not it is applicable. I agree that it's confusing, will need to see if we can clean it up.

Regards,

I.K.

Interface

Interface forum

DS25CP102: IBIS Model