This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TUSB8041EVM: production design based on EVM

Part Number: TUSB8041EVM
Other Parts Discussed in Thread: TUSB8041, TPS2001C

due to a very short time to market, a TUSB8041 design should be realized very closely to the EVM. Are the 4 power switches (TPS2001C) really needed? Any further recommendations to migrate fast from the EVM design to a production design?   

  • Hi Hanno,

    Downstream port power switches are not required.  If not implemented, FULLPWRMGMTz should be set high.  USB-IF requires exposed ports to report overcurrent events, so that is a concern if compliance testing is required.  From the schematic, the EEPROM, switches and JTAG header are not required.