• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 34 subscribers
  • Views 435 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

THVD1419: Failsafe resistors

Kazuki Itoh
Genius 11200 points

Part Number: THVD1419
Other Parts Discussed in Thread: THVD1410,

Hello team,

I have a question about THVD1419 and THVD1410.

They have full failsafe functionality at RX side.

So external failsafe resistors (PU, PD) are not required, correct?

Regards,

Itoh

  • 0
    Guru 320720 points

    The receiver's switching threshold is between -100 mV and -130 mV (typically), so that a differential input voltage of 0 V is read as high.

    External failsafe resistors are needed if you want a noise margin larger than 100 mV (20 mV in the worst case).