Hi All:
I want to write the firmware directly to the SPI flash before mounting onto the PCB, and the firmware version is v1.03. But it didn't work. I suspect there is a difference in firmware between direct burn and TUSB926x_Burner.
So, please provide the firmware of v1.03 for direct burning.
Thanks.
Hi,
This can be generated using the TUSB9261 flashburner. Using the raw FW does not include the USB descriptors, you will need to use the TUSB9261 flashbunrer SW to include the USB descriptors. We do not provide complete FW image since USB descriptors can change with each project. SW can be used to generate the complete image using a TUSB9261DEMO board. Find SW at the link below.
