• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 33 subscribers
  • Views 319 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS25BR440: Place DS25BR440 close to output side or input side?

user5358500
Intellectual 950 points
Part Number: DS25BR440

Hi Ti Team

We have a design for LVDS LCM,

CPU Board->LCM Connector --------Cable----------------LCM Connector -> LCM Module

My question is:

How do design DS25BR440?

Design On CPU Board or LCM module?

  • 0
    TI__Guru* 93670 points

    Hi Qin,

    You can consider putting DS25BR440 on LCM module. This way BR440 can compensate for all channel loss without over equalization. Please note your media loss should be within the range noted in the DS25BR440 data sheet test channel loss characteristic table.

    Regards,, Nasser