DS160PR410: DS160PR410 for Xilinx AURORA

Jason Shen

Intellectual 1965 points

Part Number: DS160PR410
Other Parts Discussed in Thread: DS64BR401, DS100MB203, , DS80PCI402

Dears

Do we have a 4CH redriver for Xilinx AURORA? need support 5Gbps and10.3125Gbps, and 25dB EQ boost. last time feedback the DS64BR401 is a 8CH , 6.4Gbps device?

Thanks

Jun Shen

over 4 years ago

0 Nasser Mohammadi over 4 years ago

TI__Guru* 93670 points

Hi Jun,

Please consider DS100MB203. This part has 4 channels and can meet 25dB EQ gain. Please below note a link to this part's data sheet:

https://www.ti.com/lit/ds/symlink/ds100mb203.pdf?ts=1614797336892&ref_url=https%253A%252F%252Fwww.ti.com%252Finterface%252Fethernet%252Fretimers-redrivers-mux-buffers%252Fproducts.html

Regards,, Nasser

0 Jason Shen over 4 years ago in reply to Nasser Mohammadi

TI__Intellectual 1965 points

Hi Nasser

Thanks for the support, and we have a check this ds100b203, it is a 1:2 MUX with only 2 input. but customer need 4ch , so how about the DS160PR410? Will DS160PR410 support?

Thanks for your help

Jun Shen

0 Nasser Mohammadi over 4 years ago in reply to Jason Shen

TI__Guru* 93670 points

Hi Jun,

PR410 cannot support 25dB of gain you had noted. Would it be possible to use DS80PCI402 but use 4 channels only. If needed, we can provide IBIS-AMI model so some system level modeling can be done before the actual schematic capture.

Regards,, Nasser

Interface

Interface forum

DS160PR410: DS160PR410 for Xilinx AURORA