XIO2001: Warpage and coplanarity

Kazuki Itoh

Genius 11430 points

Part Number: XIO2001

Hello team,

Could you please let me know the package warpage and coplanarity info of XIO2001 below?

1. Package warpage direction at nominal temperature

2. Package warpage direction and coplanarity at high temperature

Regards,

Itoh

over 5 years ago

0 JMMN over 5 years ago

TI__Guru 60870 points

Hi Itoh-san,

We will need to check with the packaging team on these requirements. Can you confirm which package you are inquiring about?

Regards,

JMMN

0 Kazuki Itoh over 5 years ago in reply to JMMN

TI__Genius 11430 points

Hi JMMN-san,

The suffix is IZWS. The package type is NFBGA.

Regards,

Itoh

0 JMMN over 5 years ago in reply to Kazuki Itoh

TI__Guru 60870 points

Hi Itoh-san,

Thank you, we will look for the answer. It may take a couple of days.

Regards,

JMMN

0 Nicholaus_Malone over 5 years ago

TI__Mastermind 27935 points

Hi Itoh-san,

Unfortunately, information on the ZWS package warpage direction and coplanarity over temperature for the XIO2001 is confidential. If the question is related to stencil thickness, we recommend using a 0.15mm stencil. Could you elaborate on why this information is needed? We may be able to better assist you with some background information.

Regards,

Nicholaus

Interface

Interface forum

XIO2001: Warpage and coplanarity