• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 34 subscribers
  • Views 464 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS25750: Configuration of role swap through I2C

Michiaki Tanii
Expert 4860 points

Part Number: TPS25750

Hi team,

Customer would like to control TPS25750 by host MCU through I2C and would like to understand if configurating role swap function or not.

Could customer configure role swap function through I2C ?

Thank you and best regards,

Michiaki

  • 0
    TI__Genius 12700 points

    Hi,

    If the PD controller is properly configured to act as a source or sink then the customer should be able to use the 4CC SWSk and SWSr commands to perform a power role swap via I2C. You can find these functions in the Technical Reference Manual of the TPS25750.

    Thank you,

    Hari