This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TUSB544: 220K PullDown Resistor Requirement

Part Number: TUSB544
Other Parts Discussed in Thread: TUSB1044,

Dear Team,

 

From below E2E question, it seems like 220k pulldown resistor is not necessary for TUSB1044.

 

https://e2e.ti.com/support/interface/f/interface-forum/858577/tusb1044-pull-down-register-on-rx-pin?tisearch=e2e-sitesearch&keymatch=TUSB1044%20220k#

 

I have a similar question for TUSB544. So I want to double confirm with you if we can remove 220k ohm pulldown resistor or not.

Thank you.

Regards,

Jim