• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 33 subscribers
  • Views 227 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS90UB960-Q1: Pattern Generation Frame Setting

Jared Becker
Genius 11845 points
Part Number: DS90UB960-Q1
Other Parts Discussed in Thread: ALP

Hi Team,

In order to set the frames per second for the pattern generation, I believe that is set by PGEN_LIN_PD, correct? I am unclear how this value corresponds to FPS. Can you please help me understand the calculation to get this number based upon 30fps and 1280x720 image resolution and 800Mbps CSI-2 speed?

Thank you,

Jared

  • 0
    TI__Genius 11340 points

    Hi Jared,

    On the 960, your frame rate is 10^10/(PgenCLKFreq* PGEN_LIN_PD * Total_LPF) Hz.

    Where your PgenCLKFreq = Refclk * 4.

    Alternatively, you can use the PatGen tab on ALP. The tab will generate your programming sequence.

    Best,

    Jiashow