Interface

Interface forum

TPS65987D: SPI flash device programming for TPS65987D

Amith Bhat1

Prodigy 135 points

Part Number: TPS65987D

Hi,

We are using a SPI flash device connected to TPS65987D PD device. Would like to know, if this device needs to be pre-programmed or we can program through I2C master? Please let me know the process to program the device for the first time.

Regards,

Amith K Bhat

over 4 years ago

0 Emma Hoying over 4 years ago

TI__Genius 9630 points

Hello,

I would recommend programming the SPI Flash directly. You can also program over I2C if you have an EC or MCU in your system, however it is a more complicated process. I can provide a document for flashless-boot via direct message however I highly recommend programming the flash using the GUI tool.

Thanks,

Emma

0 Amith Bhat1 over 4 years ago in reply to Emma Hoying

Prodigy 135 points

Hi Emma,

Could you please help me with document for flashless-boot via direct message.

When you say programming the flash using GUI tool, we need to program the flash and then solder?

Regards,

Amith K Bhat

0 Emma Hoying over 4 years ago in reply to Amith Bhat1

TI__Genius 9630 points

Hi Amith,

No you should finish putting your board together. You will need to power your flash and then flash it using the Application Customization GUI tool.

I will add you on E2E.

Thanks,

Emma

0 Amith Bhat1 over 4 years ago in reply to Emma Hoying

Prodigy 135 points

Sure. Thanks. Will be awaiting for the tool.

Regards,

Amith K Bhat.

0 pdiddymac over 4 years ago in reply to Emma Hoying

Intellectual 450 points

Hi Emma, could I also be pointed to that document please?

0 Hari Patel1 over 4 years ago in reply to pdiddymac

TI__Genius 12700 points

Hi, I will see if I could point you to it. Could you add me and provide your email address?

0 pdiddymac over 4 years ago in reply to Hari Patel1

Intellectual 450 points

Hi, I think I did as you requested but haven't heard back yet.

0 Hari Patel1 over 4 years ago in reply to pdiddymac

TI__Genius 12700 points

Hi, yes I received your request, I will send you an email tomorrow.