DS90UR910-Q1: ALP does not communicate with DS90UR910 Evaluation Board

Edmund Pang
Part Number: DS90UR910-Q1
Other Parts Discussed in Thread: ALP
I am trying to configure a register for the DS90UR910 through the ALP. I have

I have done the following troubleshooting:
1. I've tested Aardvark i2c dongle on another TI evaluation board and I can change it's registers.
2. I've read the datasheet such that I know the slave address is configured correctly.

Attached are a log file and screenshot

Also, if this product is outdated, do let me know what is the updated product
Please help, thank you
MainGUI.exe.log
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\FPDL3Base\FPDLink3_GUI.py", line 206, in OnTabSelect
    s.tabDispatch[s.currTabTxt]()
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\FPDL3Base\FPDLink3_GUI.py", line 297, in UpdatePatternGenTab
    Selected = s.board.deviceList[0]
IndexError: list index out of range
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\FPDL3Base\FPDLink3_GUI.py", line 206, in OnTabSelect
    s.tabDispatch[s.currTabTxt]()
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\FPDL3Base\FPDLink3_GUI.py", line 297, in UpdatePatternGenTab
    Selected = s.board.deviceList[0]
IndexError: list index out of range
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\FPDL3Base\FPDLink3_GUI.py", line 206, in OnTabSelect
    s.tabDispatch[s.currTabTxt]()
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\FPDL3Base\FPDLink3_GUI.py", line 297, in UpdatePatternGenTab
    Selected = s.board.deviceList[0]
IndexError: list index out of range
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\FPDL3Base\FPDLink3_GUI.py", line 206, in OnTabSelect
    s.tabDispatch[s.currTabTxt]()
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\FPDL3Base\FPDLink3_GUI.py", line 297, in UpdatePatternGenTab
    Selected = s.board.deviceList[0]
IndexError: list index out of range
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\FPDL3Base\FPDLink3_GUI.py", line 206, in OnTabSelect
    s.tabDispatch[s.currTabTxt]()
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\FPDL3Base\FPDLink3_GUI.py", line 297, in UpdatePatternGenTab
    Selected = s.board.deviceList[0]
IndexError: list index out of range
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\FPDL3Base\FPDLink3_GUI.py", line 206, in OnTabSelect
    s.tabDispatch[s.currTabTxt]()
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\FPDL3Base\FPDLink3_GUI.py", line 297, in UpdatePatternGenTab
    Selected = s.board.deviceList[0]
IndexError: list index out of range
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\FPDL3Base\FPDLink3_GUI.py", line 206, in OnTabSelect
    s.tabDispatch[s.currTabTxt]()
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\FPDL3Base\FPDLink3_GUI.py", line 297, in UpdatePatternGenTab
    Selected = s.board.deviceList[0]
IndexError: list index out of range
Traceback (most recent call last):
  File "wx\_core.pyc", line 13539, in <lambda>
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\PyAUI.py", line 4724, in Repaint
    self.Render(dc)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\PyAUI.py", line 4686, in Render
    if part.sizer_item and not part.sizer_item.IsShown():
  File "wx\_core.pyc", line 11603, in IsShown
wx._core.PyAssertionError: C++ assertion "wxAssertFailure" failed in ..\..\src\common\sizer.cpp(458): unexpected wxSizerItem::m_kind
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\FPDL3Base\FPDLink3_GUI.py", line 206, in OnTabSelect
    s.tabDispatch[s.currTabTxt]()
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\FPDL3Base\FPDLink3_GUI.py", line 297, in UpdatePatternGenTab
    Selected = s.board.deviceList[0]
IndexError: list index out of range
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\FPDL3Base\FPDLink3_GUI.py", line 206, in OnTabSelect
    s.tabDispatch[s.currTabTxt]()
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\FPDL3Base\FPDLink3_GUI.py", line 297, in UpdatePatternGenTab
    Selected = s.board.deviceList[0]
IndexError: list index out of range
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\FPDL3Base\FPDLink3_GUI.py", line 206, in OnTabSelect
    s.tabDispatch[s.currTabTxt]()
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\FPDL3Base\FPDLink3_GUI.py", line 297, in UpdatePatternGenTab
    Selected = s.board.deviceList[0]
IndexError: list index out of range
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\FPDL3Base\FPDLink3_GUI.py", line 206, in OnTabSelect
    s.tabDispatch[s.currTabTxt]()
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\FPDL3Base\FPDLink3_GUI.py", line 297, in UpdatePatternGenTab
    Selected = s.board.deviceList[0]
IndexError: list index out of range
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\FPDL3Base\FPDLink3_GUI.py", line 206, in OnTabSelect
    s.tabDispatch[s.currTabTxt]()
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\FPDL3Base\FPDLink3_GUI.py", line 297, in UpdatePatternGenTab
    Selected = s.board.deviceList[0]
IndexError: list index out of range
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\FPDL3Base\FPDLink3_GUI.py", line 206, in OnTabSelect
    s.tabDispatch[s.currTabTxt]()
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\FPDL3Base\FPDLink3_GUI.py", line 297, in UpdatePatternGenTab
    Selected = s.board.deviceList[0]
IndexError: list index out of range
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\FPDL3Base\FPDLink3_GUI.py", line 206, in OnTabSelect
    s.tabDispatch[s.currTabTxt]()
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\FPDL3Base\FPDLink3_GUI.py", line 297, in UpdatePatternGenTab
    Selected = s.board.deviceList[0]
IndexError: list index out of range
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\FPDL3Base\FPDLink3_GUI.py", line 206, in OnTabSelect
    s.tabDispatch[s.currTabTxt]()
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\FPDL3Base\FPDLink3_GUI.py", line 297, in UpdatePatternGenTab
    Selected = s.board.deviceList[0]
IndexError: list index out of range
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\FPDL3Base\FPDLink3_GUI.py", line 206, in OnTabSelect
    s.tabDispatch[s.currTabTxt]()
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\FPDL3Base\FPDLink3_GUI.py", line 297, in UpdatePatternGenTab
    Selected = s.board.deviceList[0]
IndexError: list index out of range
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\FPDL3Base\FPDLink3_GUI.py", line 206, in OnTabSelect
    s.tabDispatch[s.currTabTxt]()
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\FPDL3Base\FPDLink3_GUI.py", line 297, in UpdatePatternGenTab
    Selected = s.board.deviceList[0]
IndexError: list index out of range
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\FPDL3Base\FPDLink3_GUI.py", line 206, in OnTabSelect
    s.tabDispatch[s.currTabTxt]()
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\FPDL3Base\FPDLink3_GUI.py", line 304, in UpdatePatternGenTab
    s.patternGenGUIs[name] = PatternGen_GUI( s.panel, s.board, Selected,type=type)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\PatternGenBase\PatternGen_GUI.py", line 43, in __init__
    s.capa = CapabilitiesMap[Models['_'+topoDeviceSelected.IDstring]]
KeyError: '_\x00\x00\x00\x00\x00'
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\FPDL3Base\FPDLink3_GUI.py", line 206, in OnTabSelect
    s.tabDispatch[s.currTabTxt]()
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\FPDL3Base\FPDLink3_GUI.py", line 304, in UpdatePatternGenTab
    s.patternGenGUIs[name] = PatternGen_GUI( s.panel, s.board, Selected,type=type)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\PatternGenBase\PatternGen_GUI.py", line 43, in __init__
    s.capa = CapabilitiesMap[Models['_'+topoDeviceSelected.IDstring]]
KeyError: '_\x00\x00\x00\x00\x00'
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\FPDL3Base\FPDLink3_GUI.py", line 206, in OnTabSelect
    s.tabDispatch[s.currTabTxt]()
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\FPDL3Base\FPDLink3_GUI.py", line 304, in UpdatePatternGenTab
    s.patternGenGUIs[name] = PatternGen_GUI( s.panel, s.board, Selected,type=type)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\PatternGenBase\PatternGen_GUI.py", line 43, in __init__
    s.capa = CapabilitiesMap[Models['_'+topoDeviceSelected.IDstring]]
KeyError: '_\x00\x00\x00\x00\x00'
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 196, in FPSetFocus
    s.parent.SetRegFocus( s.currFocusPanel)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 465, in SetRegFocus
    s.RefreshBitValues()
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 486, in RefreshBitValues
    regVal = s.ReadReg( addr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 694, in ReadReg
    regVal = s.board.ReadReg( regAddr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\DS90UR910\DS90UR910_Lib.py", line 84, in ReadReg
    readStatus = NanoALP.ReadI2C( s.GetALPInterface(), s.devAddr, regIndex, 1)
TypeError: an integer is required
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 196, in FPSetFocus
    s.parent.SetRegFocus( s.currFocusPanel)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 465, in SetRegFocus
    s.RefreshBitValues()
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 486, in RefreshBitValues
    regVal = s.ReadReg( addr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 694, in ReadReg
    regVal = s.board.ReadReg( regAddr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\DS90UR910\DS90UR910_Lib.py", line 84, in ReadReg
    readStatus = NanoALP.ReadI2C( s.GetALPInterface(), s.devAddr, regIndex, 1)
TypeError: an integer is required
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 196, in FPSetFocus
    s.parent.SetRegFocus( s.currFocusPanel)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 465, in SetRegFocus
    s.RefreshBitValues()
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 486, in RefreshBitValues
    regVal = s.ReadReg( addr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 694, in ReadReg
    regVal = s.board.ReadReg( regAddr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\DS90UR910\DS90UR910_Lib.py", line 84, in ReadReg
    readStatus = NanoALP.ReadI2C( s.GetALPInterface(), s.devAddr, regIndex, 1)
TypeError: an integer is required
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 553, in RegOnDumpRegsClick
    regVal = s.ReadReg( addr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 694, in ReadReg
    regVal = s.board.ReadReg( regAddr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\DS90UR910\DS90UR910_Lib.py", line 84, in ReadReg
    readStatus = NanoALP.ReadI2C( s.GetALPInterface(), s.devAddr, regIndex, 1)
TypeError: an integer is required
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 617, in RegOnLoadRegsClick
    s.RefreshAllRegs()
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 502, in RefreshAllRegs
    s.RefreshBitValues()
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 486, in RefreshBitValues
    regVal = s.ReadReg( addr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 694, in ReadReg
    regVal = s.board.ReadReg( regAddr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\DS90UR910\DS90UR910_Lib.py", line 84, in ReadReg
    readStatus = NanoALP.ReadI2C( s.GetALPInterface(), s.devAddr, regIndex, 1)
TypeError: an integer is required
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 196, in FPSetFocus
    s.parent.SetRegFocus( s.currFocusPanel)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 465, in SetRegFocus
    s.RefreshBitValues()
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 486, in RefreshBitValues
    regVal = s.ReadReg( addr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 694, in ReadReg
    regVal = s.board.ReadReg( regAddr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\DS90UR910\DS90UR910_Lib.py", line 84, in ReadReg
    readStatus = NanoALP.ReadI2C( s.GetALPInterface(), s.devAddr, regIndex, 1)
TypeError: an integer is required
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 196, in FPSetFocus
    s.parent.SetRegFocus( s.currFocusPanel)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 465, in SetRegFocus
    s.RefreshBitValues()
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 486, in RefreshBitValues
    regVal = s.ReadReg( addr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 694, in ReadReg
    regVal = s.board.ReadReg( regAddr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\DS90UR910\DS90UR910_Lib.py", line 84, in ReadReg
    readStatus = NanoALP.ReadI2C( s.GetALPInterface(), s.devAddr, regIndex, 1)
TypeError: an integer is required
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 196, in FPSetFocus
    s.parent.SetRegFocus( s.currFocusPanel)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 465, in SetRegFocus
    s.RefreshBitValues()
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 486, in RefreshBitValues
    regVal = s.ReadReg( addr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 694, in ReadReg
    regVal = s.board.ReadReg( regAddr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\DS90UR910\DS90UR910_Lib.py", line 84, in ReadReg
    readStatus = NanoALP.ReadI2C( s.GetALPInterface(), s.devAddr, regIndex, 1)
TypeError: an integer is required
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 553, in RegOnDumpRegsClick
    regVal = s.ReadReg( addr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 694, in ReadReg
    regVal = s.board.ReadReg( regAddr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\DS90UR910\DS90UR910_Lib.py", line 84, in ReadReg
    readStatus = NanoALP.ReadI2C( s.GetALPInterface(), s.devAddr, regIndex, 1)
TypeError: an integer is required
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 196, in FPSetFocus
    s.parent.SetRegFocus( s.currFocusPanel)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 465, in SetRegFocus
    s.RefreshBitValues()
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 486, in RefreshBitValues
    regVal = s.ReadReg( addr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 694, in ReadReg
    regVal = s.board.ReadReg( regAddr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\DS90UR910\DS90UR910_Lib.py", line 84, in ReadReg
    readStatus = NanoALP.ReadI2C( s.GetALPInterface(), s.devAddr, regIndex, 1)
TypeError: an integer is required
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 196, in FPSetFocus
    s.parent.SetRegFocus( s.currFocusPanel)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 465, in SetRegFocus
    s.RefreshBitValues()
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 486, in RefreshBitValues
    regVal = s.ReadReg( addr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 694, in ReadReg
    regVal = s.board.ReadReg( regAddr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\DS90UR910\DS90UR910_Lib.py", line 84, in ReadReg
    readStatus = NanoALP.ReadI2C( s.GetALPInterface(), s.devAddr, regIndex, 1)
TypeError: an integer is required
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 553, in RegOnDumpRegsClick
    regVal = s.ReadReg( addr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 694, in ReadReg
    regVal = s.board.ReadReg( regAddr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\DS90UR910\DS90UR910_Lib.py", line 84, in ReadReg
    readStatus = NanoALP.ReadI2C( s.GetALPInterface(), s.devAddr, regIndex, 1)
TypeError: an integer is required
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 196, in FPSetFocus
    s.parent.SetRegFocus( s.currFocusPanel)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 465, in SetRegFocus
    s.RefreshBitValues()
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 486, in RefreshBitValues
    regVal = s.ReadReg( addr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 694, in ReadReg
    regVal = s.board.ReadReg( regAddr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\DS90UR910\DS90UR910_Lib.py", line 84, in ReadReg
    readStatus = NanoALP.ReadI2C( s.GetALPInterface(), s.devAddr, regIndex, 1)
TypeError: an integer is required
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 553, in RegOnDumpRegsClick
    regVal = s.ReadReg( addr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 694, in ReadReg
    regVal = s.board.ReadReg( regAddr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\DS90UR910\DS90UR910_Lib.py", line 84, in ReadReg
    readStatus = NanoALP.ReadI2C( s.GetALPInterface(), s.devAddr, regIndex, 1)
TypeError: an integer is required
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 553, in RegOnDumpRegsClick
    regVal = s.ReadReg( addr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 694, in ReadReg
    regVal = s.board.ReadReg( regAddr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\DS90UR910\DS90UR910_Lib.py", line 84, in ReadReg
    readStatus = NanoALP.ReadI2C( s.GetALPInterface(), s.devAddr, regIndex, 1)
TypeError: an integer is required
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 553, in RegOnDumpRegsClick
    regVal = s.ReadReg( addr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 694, in ReadReg
    regVal = s.board.ReadReg( regAddr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\DS90UR910\DS90UR910_Lib.py", line 84, in ReadReg
    readStatus = NanoALP.ReadI2C( s.GetALPInterface(), s.devAddr, regIndex, 1)
TypeError: an integer is required
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 196, in FPSetFocus
    s.parent.SetRegFocus( s.currFocusPanel)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 465, in SetRegFocus
    s.RefreshBitValues()
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 486, in RefreshBitValues
    regVal = s.ReadReg( addr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 694, in ReadReg
    regVal = s.board.ReadReg( regAddr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\DS90UR910\DS90UR910_Lib.py", line 84, in ReadReg
    readStatus = NanoALP.ReadI2C( s.GetALPInterface(), s.devAddr, regIndex, 1)
TypeError: an integer is required
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 196, in FPSetFocus
    s.parent.SetRegFocus( s.currFocusPanel)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 465, in SetRegFocus
    s.RefreshBitValues()
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 486, in RefreshBitValues
    regVal = s.ReadReg( addr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 694, in ReadReg
    regVal = s.board.ReadReg( regAddr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\DS90UR910\DS90UR910_Lib.py", line 84, in ReadReg
    readStatus = NanoALP.ReadI2C( s.GetALPInterface(), s.devAddr, regIndex, 1)
TypeError: an integer is required
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 196, in FPSetFocus
    s.parent.SetRegFocus( s.currFocusPanel)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 465, in SetRegFocus
    s.RefreshBitValues()
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 486, in RefreshBitValues
    regVal = s.ReadReg( addr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 694, in ReadReg
    regVal = s.board.ReadReg( regAddr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\DS90UR910\DS90UR910_Lib.py", line 84, in ReadReg
    readStatus = NanoALP.ReadI2C( s.GetALPInterface(), s.devAddr, regIndex, 1)
TypeError: an integer is required
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 196, in FPSetFocus
    s.parent.SetRegFocus( s.currFocusPanel)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 465, in SetRegFocus
    s.RefreshBitValues()
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 486, in RefreshBitValues
    regVal = s.ReadReg( addr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 694, in ReadReg
    regVal = s.board.ReadReg( regAddr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\DS90UR910\DS90UR910_Lib.py", line 84, in ReadReg
    readStatus = NanoALP.ReadI2C( s.GetALPInterface(), s.devAddr, regIndex, 1)
TypeError: an integer is required
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 553, in RegOnDumpRegsClick
    regVal = s.ReadReg( addr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 694, in ReadReg
    regVal = s.board.ReadReg( regAddr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\DS90UR910\DS90UR910_Lib.py", line 84, in ReadReg
    readStatus = NanoALP.ReadI2C( s.GetALPInterface(), s.devAddr, regIndex, 1)
TypeError: an integer is required
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 196, in FPSetFocus
    s.parent.SetRegFocus( s.currFocusPanel)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 465, in SetRegFocus
    s.RefreshBitValues()
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 486, in RefreshBitValues
    regVal = s.ReadReg( addr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 694, in ReadReg
    regVal = s.board.ReadReg( regAddr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\DS90UR910\DS90UR910_Lib.py", line 84, in ReadReg
    readStatus = NanoALP.ReadI2C( s.GetALPInterface(), s.devAddr, regIndex, 1)
TypeError: an integer is required
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\FPDL3Base\FPDLink3_GUI.py", line 206, in OnTabSelect
    s.tabDispatch[s.currTabTxt]()
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\FPDL3Base\FPDLink3_GUI.py", line 297, in UpdatePatternGenTab
    Selected = s.board.deviceList[0]
IndexError: list index out of range
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 196, in FPSetFocus
    s.parent.SetRegFocus( s.currFocusPanel)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 465, in SetRegFocus
    s.RefreshBitValues()
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 486, in RefreshBitValues
    regVal = s.ReadReg( addr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 694, in ReadReg
    regVal = s.board.ReadReg( regAddr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\DS90UR910\DS90UR910_Lib.py", line 84, in ReadReg
    readStatus = NanoALP.ReadI2C( s.GetALPInterface(), s.devAddr, regIndex, 1)
TypeError: an integer is required
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 553, in RegOnDumpRegsClick
    regVal = s.ReadReg( addr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 694, in ReadReg
    regVal = s.board.ReadReg( regAddr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\DS90UR910\DS90UR910_Lib.py", line 84, in ReadReg
    readStatus = NanoALP.ReadI2C( s.GetALPInterface(), s.devAddr, regIndex, 1)
TypeError: an integer is required
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 196, in FPSetFocus
    s.parent.SetRegFocus( s.currFocusPanel)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 465, in SetRegFocus
    s.RefreshBitValues()
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 486, in RefreshBitValues
    regVal = s.ReadReg( addr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 694, in ReadReg
    regVal = s.board.ReadReg( regAddr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\DS90UR910\DS90UR910_Lib.py", line 84, in ReadReg
    readStatus = NanoALP.ReadI2C( s.GetALPInterface(), s.devAddr, regIndex, 1)
TypeError: an integer is required
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 196, in FPSetFocus
    s.parent.SetRegFocus( s.currFocusPanel)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 465, in SetRegFocus
    s.RefreshBitValues()
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 486, in RefreshBitValues
    regVal = s.ReadReg( addr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 694, in ReadReg
    regVal = s.board.ReadReg( regAddr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\DS90UR910\DS90UR910_Lib.py", line 84, in ReadReg
    readStatus = NanoALP.ReadI2C( s.GetALPInterface(), s.devAddr, regIndex, 1)
TypeError: an integer is required
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 553, in RegOnDumpRegsClick
    regVal = s.ReadReg( addr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 694, in ReadReg
    regVal = s.board.ReadReg( regAddr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\DS90UR910\DS90UR910_Lib.py", line 84, in ReadReg
    readStatus = NanoALP.ReadI2C( s.GetALPInterface(), s.devAddr, regIndex, 1)
TypeError: an integer is required
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 196, in FPSetFocus
    s.parent.SetRegFocus( s.currFocusPanel)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 465, in SetRegFocus
    s.RefreshBitValues()
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 486, in RefreshBitValues
    regVal = s.ReadReg( addr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 694, in ReadReg
    regVal = s.board.ReadReg( regAddr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\DS90UR910\DS90UR910_Lib.py", line 84, in ReadReg
    readStatus = NanoALP.ReadI2C( s.GetALPInterface(), s.devAddr, regIndex, 1)
TypeError: an integer is required
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 553, in RegOnDumpRegsClick
    regVal = s.ReadReg( addr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 694, in ReadReg
    regVal = s.board.ReadReg( regAddr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\DS90UR910\DS90UR910_Lib.py", line 84, in ReadReg
    readStatus = NanoALP.ReadI2C( s.GetALPInterface(), s.devAddr, regIndex, 1)
TypeError: an integer is required
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 196, in FPSetFocus
    s.parent.SetRegFocus( s.currFocusPanel)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 465, in SetRegFocus
    s.RefreshBitValues()
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 486, in RefreshBitValues
    regVal = s.ReadReg( addr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 694, in ReadReg
    regVal = s.board.ReadReg( regAddr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\DS90UR910\DS90UR910_Lib.py", line 84, in ReadReg
    readStatus = NanoALP.ReadI2C( s.GetALPInterface(), s.devAddr, regIndex, 1)
TypeError: an integer is required
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 196, in FPSetFocus
    s.parent.SetRegFocus( s.currFocusPanel)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 465, in SetRegFocus
    s.RefreshBitValues()
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 486, in RefreshBitValues
    regVal = s.ReadReg( addr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 694, in ReadReg
    regVal = s.board.ReadReg( regAddr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\DS90UR910\DS90UR910_Lib.py", line 84, in ReadReg
    readStatus = NanoALP.ReadI2C( s.GetALPInterface(), s.devAddr, regIndex, 1)
TypeError: an integer is required
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 196, in FPSetFocus
    s.parent.SetRegFocus( s.currFocusPanel)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 465, in SetRegFocus
    s.RefreshBitValues()
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 486, in RefreshBitValues
    regVal = s.ReadReg( addr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 694, in ReadReg
    regVal = s.board.ReadReg( regAddr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\DS90UR910\DS90UR910_Lib.py", line 84, in ReadReg
    readStatus = NanoALP.ReadI2C( s.GetALPInterface(), s.devAddr, regIndex, 1)
TypeError: an integer is required
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 196, in FPSetFocus
    s.parent.SetRegFocus( s.currFocusPanel)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 465, in SetRegFocus
    s.RefreshBitValues()
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 486, in RefreshBitValues
    regVal = s.ReadReg( addr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 694, in ReadReg
    regVal = s.board.ReadReg( regAddr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\DS90UR910\DS90UR910_Lib.py", line 84, in ReadReg
    readStatus = NanoALP.ReadI2C( s.GetALPInterface(), s.devAddr, regIndex, 1)
TypeError: an integer is required
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 553, in RegOnDumpRegsClick
    regVal = s.ReadReg( addr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 694, in ReadReg
    regVal = s.board.ReadReg( regAddr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\DS90UR910\DS90UR910_Lib.py", line 84, in ReadReg
    readStatus = NanoALP.ReadI2C( s.GetALPInterface(), s.devAddr, regIndex, 1)
TypeError: an integer is required
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 196, in FPSetFocus
    s.parent.SetRegFocus( s.currFocusPanel)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 465, in SetRegFocus
    s.RefreshBitValues()
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 486, in RefreshBitValues
    regVal = s.ReadReg( addr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 694, in ReadReg
    regVal = s.board.ReadReg( regAddr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\DS90UR910\DS90UR910_Lib.py", line 84, in ReadReg
    readStatus = NanoALP.ReadI2C( s.GetALPInterface(), s.devAddr, regIndex, 1)
TypeError: an integer is required
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 553, in RegOnDumpRegsClick
    regVal = s.ReadReg( addr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 694, in ReadReg
    regVal = s.board.ReadReg( regAddr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\DS90UR910\DS90UR910_Lib.py", line 84, in ReadReg
    readStatus = NanoALP.ReadI2C( s.GetALPInterface(), s.devAddr, regIndex, 1)
TypeError: an integer is required
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 196, in FPSetFocus
    s.parent.SetRegFocus( s.currFocusPanel)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 465, in SetRegFocus
    s.RefreshBitValues()
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 486, in RefreshBitValues
    regVal = s.ReadReg( addr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 694, in ReadReg
    regVal = s.board.ReadReg( regAddr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\DS90UR910\DS90UR910_Lib.py", line 84, in ReadReg
    readStatus = NanoALP.ReadI2C( s.GetALPInterface(), s.devAddr, regIndex, 1)
TypeError: an integer is required
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 196, in FPSetFocus
    s.parent.SetRegFocus( s.currFocusPanel)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 465, in SetRegFocus
    s.RefreshBitValues()
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 486, in RefreshBitValues
    regVal = s.ReadReg( addr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 694, in ReadReg
    regVal = s.board.ReadReg( regAddr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\DS90UR910\DS90UR910_Lib.py", line 84, in ReadReg
    readStatus = NanoALP.ReadI2C( s.GetALPInterface(), s.devAddr, regIndex, 1)
TypeError: an integer is required
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 553, in RegOnDumpRegsClick
    regVal = s.ReadReg( addr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 694, in ReadReg
    regVal = s.board.ReadReg( regAddr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\DS90UR910\DS90UR910_Lib.py", line 84, in ReadReg
    readStatus = NanoALP.ReadI2C( s.GetALPInterface(), s.devAddr, regIndex, 1)
TypeError: an integer is required
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 196, in FPSetFocus
    s.parent.SetRegFocus( s.currFocusPanel)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 465, in SetRegFocus
    s.RefreshBitValues()
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 486, in RefreshBitValues
    regVal = s.ReadReg( addr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 694, in ReadReg
    regVal = s.board.ReadReg( regAddr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\DS90UR910\DS90UR910_Lib.py", line 84, in ReadReg
    readStatus = NanoALP.ReadI2C( s.GetALPInterface(), s.devAddr, regIndex, 1)
TypeError: an integer is required
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 196, in FPSetFocus
    s.parent.SetRegFocus( s.currFocusPanel)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 465, in SetRegFocus
    s.RefreshBitValues()
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 486, in RefreshBitValues
    regVal = s.ReadReg( addr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 694, in ReadReg
    regVal = s.board.ReadReg( regAddr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\DS90UR910\DS90UR910_Lib.py", line 84, in ReadReg
    readStatus = NanoALP.ReadI2C( s.GetALPInterface(), s.devAddr, regIndex, 1)
TypeError: an integer is required
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 553, in RegOnDumpRegsClick
    regVal = s.ReadReg( addr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 694, in ReadReg
    regVal = s.board.ReadReg( regAddr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\DS90UR910\DS90UR910_Lib.py", line 84, in ReadReg
    readStatus = NanoALP.ReadI2C( s.GetALPInterface(), s.devAddr, regIndex, 1)
TypeError: an integer is required
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 196, in FPSetFocus
    s.parent.SetRegFocus( s.currFocusPanel)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 465, in SetRegFocus
    s.RefreshBitValues()
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 486, in RefreshBitValues
    regVal = s.ReadReg( addr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 694, in ReadReg
    regVal = s.board.ReadReg( regAddr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\DS90UR910\DS90UR910_Lib.py", line 84, in ReadReg
    readStatus = NanoALP.ReadI2C( s.GetALPInterface(), s.devAddr, regIndex, 1)
TypeError: an integer is required
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 196, in FPSetFocus
    s.parent.SetRegFocus( s.currFocusPanel)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 465, in SetRegFocus
    s.RefreshBitValues()
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 486, in RefreshBitValues
    regVal = s.ReadReg( addr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 694, in ReadReg
    regVal = s.board.ReadReg( regAddr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\DS90UR910\DS90UR910_Lib.py", line 84, in ReadReg
    readStatus = NanoALP.ReadI2C( s.GetALPInterface(), s.devAddr, regIndex, 1)
TypeError: an integer is required
Traceback (most recent call last):
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 553, in RegOnDumpRegsClick
    regVal = s.ReadReg( addr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\RegistersGUI.py", line 694, in ReadReg
    regVal = s.board.ReadReg( regAddr)
  File "C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.52.0030\Profiles\DS90UR910\DS90UR910_Lib.py", line 84, in ReadReg
    readStatus = NanoALP.ReadI2C( s.GetALPInterface(), s.devAddr, regIndex, 1)
TypeError: an integer is required
over 3 years ago
0 Vishy Viswanathan over 3 years ago
TI__Mastermind 21685 points
Edmund,
Some suggestions below:
a) When you tested, did you choose the correct I2C address in information tab? Just checking. In case not, please try so communication to correct i2c address is established.
b) Looks like you have a very old ALP version (v1.52.0030). The UR910 profile in that version is 2012 dated. This profile later got updated. Suggest you please update to the latest version on the web (v1.57.0030). Link below
https://www.ti.com/tool/ALP
Please install both ALP frame work and ALP Profile update in that order. I think you might have to uninstall v1.52 first.
Thanks,
Vishy
0 Edmund Pang over 3 years ago in reply to Vishy Viswanathan
Prodigy 10 points
Resolved with (b). Thank you!
Interface

Interface forum

DS90UR910-Q1: ALP does not communicate with DS90UR910 Evaluation Board
