• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 33 subscribers
  • Views 196 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS90UB936-Q1: FrameValid and LineValid

Jared Becker
Genius 11845 points
Part Number: DS90UB936-Q1

Hi Team,

In the 936 datasheet, section 7.4.14 discussed FrameValid and LineValid Indicators, but where can a user actually see the data reflected for a valid frame and a valid line? I do not see a pin that reflects this information, nor a register to is actively reflecting this information. Where can this information be found?

Thanks,

Jared

  • 0
    TI__Mastermind 28240 points

    Hi Jared,

    You can program the GPIO pins to output the FrameValid and LineValid data. Refer to section 7.4.13.2 GPIO Output Pin Control and Table 8 in the 936 datasheet to find the specific registers (0x10-0x16) and bits that you would need to set to output this information at select GPIO pins.

    Best,

    Justin Phan