• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 34 subscribers
  • Views 239 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN75DPHY440SS: MIPI route line check

Ren XL
Prodigy 20 points

Part Number: SN75DPHY440SS

hi team,

     we route GND between different mipi lanes as follows. But it has to be split near DPHY440 pins, is this ok or not? Any suggestions?

    thanks.

XL Ren

  • +1
    TI__Guru**** 188271 points

    XL Ren

    I don't see this as an issue, please make sure the ground trace is

    • Routed along the entire differential signal
    • Same distance is maintained between the ground trace and the differential trace throughout the entire routing
    • Grounded at both ends

    Thanks

    David