• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 136 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TRS3221E: DC power in DOUT pin

Cedrick
Expert 8270 points
Part Number: TRS3221E

Hi,

Good day.

Our customer is using the TRS3221E and they have an inquiry about their application. Kindly see the details below.

"I have an application where the D-out of the RS232 transceiver TRS3221EIRGTR is also connected to a battery terminal with 9VDC.
The TRS3221EIRGTR will be turned off (with FORCEOFF) when the 9VDC is active.  The question is, will any harm come to the TRS3221EIRGTR when it is in the FORCEOFF condition and the 9VDC is powered?"

Looking forward to your inputs. Thank you.


Regards,

Cedrick

  • 0
    TI__Guru 68402 points

    Cedrick,

    The absolute maximum of the D-OFF pin works up to 13.2V, meaning it will only be damaged if the voltage on the D-OUT pin exceeds 13.2V. Applying 9V to this pin should be okay and cause no damage to the device.

    Regards,

    Eric Hackett