Part Number: AM2754-Q1 Other Parts Discussed in Thread: SYSCONFIG , TAD5212
Mcasp buffer order
To be short, in case of multiple serializers used in one Mcasp, the samples are placed interleaved by slot not frame by default. (Please check the "12.1…
Part Number: J722SXH01EVM
Tool/software:
How do I use the Fusion2 board with the J722SXH01EVM ?
When I try to run the single camera demo, I see the following error:
[MCU2_0] 76.844004 s: Error writing 0x01 to de-serializer(0x3d) register 0x4c…
Part Number: TXE8124-Q1 Other Parts Discussed in Thread: TXE8116 , TXE8124 Tool/software: FAQ: Logic and Voltage Translation > IxC and SPI >> VOH/IOH/VOL/IOL and Total ICC Current Definitions
This FAQ describes 6 key spec's for I/O expanders.
These…
Part Number: TDA4VM
Tool/software:
I'm using the TDA4VM Linux or Linux+RTOS 8.6 SDK. What parameters or patches are available to be enable I-frame period and IDR frame period?
Part Number: AM62A7 Tool/software: Currently on the AM62A TI EVM, we have a OSPI Serial NAND Flash from Winbond.
The flash is: W35N01JWTBAG
Let us understand how the BBM is done with respect to some specific registers.
Part Number: PROCESSOR-SDK-AM62X
Tool/software:
In MCU+ SDK, during Flash Initialization, we read the device id and manufacture id.
Most common failure is " Unable to read Flash ID... "
Let us understand what parameters does the API Flash_norOspiReadID…
