• State TI Thinks Resolved
  • Locked Locked
  • Replies 6 replies
  • Answers 2 answers
  • Subscribers 33 subscribers
  • Views 1836 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TUSB3210: Unknow device on Window System

Shu-Cheng LIN
Guru 11785 points
Part Number: TUSB3210
Other Parts Discussed in Thread: TUSB3410

Hi Sirs,

Our TUSB3210 will be unknow device on system device manager.

We have install TUSB3410 Single driver but still unknow device

Our schematic as below

FLBDB01_R1_0816.output.pdf

Please tell us how to fix it? have others driver or?

Thanks!!

  • 0
    TI__Expert 7395 points

    Hello Shu-Cheng,

    Can you please clarify if the device you are using is either TUSB3210 or TUSB3410?

    Have you programmed the required firmware to the external EEPROM? If so, which firmware did you programmed?

    Please provide a screenshot showing the device's "Hardware ID" on Device Manager

    Regards,

    Jorge

  • 0 in reply to Jorge Llamas (SWAT)
    Guru 11785 points

    Hi Sirs,

    Can you please clarify if the device you are using is either TUSB3210 or TUSB3410?

    We use TUSB3210

    Have you programmed the required firmware to the external EEPROM? If so, which firmware did you programmed?

    We don't programmed any firmware to the external EEPROM

    Please provide a screenshot showing the device's "Hardware ID" on Device Manager

    Do you mean this?

  • 0 in reply to Shu-Cheng LIN
    Guru 11785 points

    Hi Sirs,

    Update pic as below

  • 0 in reply to Shu-Cheng LIN
    TI__Expert 7395 points
    Shu-Cheng,

    The TUSB3210 is a General purpose USB controller. You will need to develop a firmware to define the behavior/interface of your device, and the firmware must be programmed to an external EEPROM that should be connected to the TUSB3210 through the I2C interface.

    The TUSB3410 USBUART driver is not intended for this device.

    Regards,
    Jorge
  • 0 in reply to Jorge Llamas (SWAT)
    Guru 11785 points

    Hi Sirs,

    Thanks for your reply.

    For now we only connect and use on OS device manger then saw unknow device.

    On this step, do we still need to develop a firmware to define the behavior/interface of our device?

    As i know it could catch this device on OS device manger ( connected only) then develop a firmware to define the behavior/interface.

    Am i wrong?

  • 0 in reply to Shu-Cheng LIN
    TI__Expert 7395 points
    Shu-Cheng,

    When the TUSB3210 is plugged-in over USB, the bootcode (which is stored on the device's internal ROM) will try to get your firmware from the external EEPROM. If there is no EEPROM, or if the data on the EEPROM is not valid, it will enumerate a USB interface (VID_0451&PID_2136) that would let you program the external EEPROM with your firmware over USB (This can be done using the TUSB3x10 EEPROM Burner - www.ti.com/.../sllc443).

    So what you are seeing when connecting the device is precisely that interface. You still need to develop your firmware (and program that on the external EEPROM) so you can manipulate the GPIOs and perform any other tasks you may need.

    Regards,
    Jorge